Aztec on one engine
9 min read

A while back a friend of mine was contemplating moving up from a high-performance, single-engine Beechcraft A36 Bonanza to a Model 58 Baron, the twin-engine variant of the same airplane. My friend is a risk evaluator, and as part of that evaluation, he asked his valued local instructor, a professional turboprop pilot, about the relative safety and hazards of a multiengine airplane.

That instructor, also a ground school student of mine and a reader of my FLYING LESSONS Weekly e-newsletter, asked me for my opinion as a multiengine instructor and student of mishap causes and outcomes. This was my response:

Aztec on one engine

You can fly a twin on one engine, but it takes prompt, correct and sometimes aggressive action.

First, I will never try to talk someone out of purchasing a twin-engine airplane on the basis of the number of engines alone. Most twins perform better and carry a greater load than most singles. Although modern single-engine airplanes are frequently equipped with redundant systems, most twins have more redundancy than singles. Mainly because of their size and weight-carrying capability, many twins have more equipment than singles, including things like radar and ice protection devices. In capable hands, twin-engine aircraft are obviously safer, because they provide at least the potential option of continued flight in many situations in the event one engine fails.

The issue, then, is not telling you a twin would or would not be a good thing for you. The question instead is:

  1. Will you commit to the initial and recurrent training necessary to take advantage of the increased safety of a second engine?
  2. Are you willing to invest what it takes to safely operate the twin? I won’t address the financial side, except as it relates to the cost of training, below.

Flying a multiengine airplane is much higher workload than a comparable single. When everything is working properly, you have two of almost everything to manage and monitor. More importantly, if one engine begins to act up, it may take significant pilot skill to keep things going satisfactorily.

In a single-engine airplane, if the engine quits, the airplane will tend to remain wings level and yaw straight. As long as the pilot does not resist the airplane’s natural nose-down tendency following a power loss, a single will tend to keep flying straight ahead unless the pilot commands otherwise.

Conversely, if an engine quits in a twin, the aircraft will immediately and dramatically begin to diverge from controlled flight in all three axes.  It takes prompt, correct and in some situations aggressive pilot action to prevent the airplane from going out of control. The slower the airplane is at the time of failure, the more aggressive the pilot must be. Under some circumstances it will become completely uncontrollable well before the wing stalls, because of insufficient airflow over the control surfaces to counter asymmetric thrust.

So how is this safer? If the pilot is well trained and has relevant, recent experience, he or she will be ready in the unlikely event of engine failure.  Where we are trained to consider emergency landing spots for every takeoff in a single, in a twin it’s mandatory to consider the options for abort or flight for every phase of takeoff, every time you line up to depart. I teach this “line-up” briefing: “If the gear is down we’re going down, if the gear is up, three degrees up.” Before feathering a propeller near the end of the Engine Failure memory checklist items, a level to three-degree-up pitch attitude results in approximately “blue line,” or best rate of climb on one engine speed, in every light twin I’ve flown. It’s a good target to hold to assure enough airflow to maintain control authority, and the best rate or climb (actually, usually the least rate of descent) in this configuration.

Explained: If the gear is still extended when an engine quits in a piston twin, the airplane will decelerate so rapidly there is no option for continued, controlled flight. Pull both throttles to idle and land straight ahead—it’s the same risk you take when departing in a single-engine airplane, with the added requirement for prompt, correct and aggressive pilot response. Although there is probably an “accelerate-go” chart in the POH that gives guidance for climbing out if an engine fails on takeoff, you’ll note that in most realistic combinations of airplane weight and environmental conditions the airplane does not have any climb capability in this condition, even if flown perfectly. Hence, if the gear is down, you must go down—land straight ahead, reducing power on the good engine so you can maintain direction control to the ground.

Likewise, if the gear is up, it takes a very shallow climb attitude in most light twins to fly at the speed for best single-engine climb–“blue line,” as identified on the airspeed indicator. As I’ve said, in many piston twins it’s about a three-degree nose up attitude while the “dead” engine’s propeller is still windmilling. That’s the initial attitude necessary for best climb (or least descent) immediately after an engine quits.  After properly identifying the failed engine, exhausting restart attempts if altitude and time permit, and feathering an unrestartable engine’s propeller to reduce drag, it takes about a seven degree nose up attitude in most piston twins to hold blue line.

When that happens, at very best you’ll see 250 to 400 fpm climb rate while covering two miles across the ground for every minute flown. You’ll be 4.5 to five miles from the airport before you make it to pattern altitude if an engine quits shortly after gear retraction and you do everything perfectly.

In many twins, and under many conditions, single-engine climb will be even worse. You may find that even if you do everything right the airplane won’t outclimb terrain on one engine. You may have to throttle back the good engine and make an off-airport landing to avoid a high-speed collision with terrain, or a loss of control if you subconsciously pitch the nose higher to try to clear obstacles, only to lose speed and control authority to compensate for asymmetric thrust.

A twin-engine pilot needs to train on engine-out procedures regularly in order to enjoy an increase in safety should an engine quit. In fact, the pilot who does not maintain an advanced training regimen will be less safe in a twin than in a single, because a he/she may not be prepared to properly, correctly and aggressively respond to an engine anomaly.  Two engines mean twice as much a chance one engine will quit for a given amount or flying time, so there is even a greater increase in risk to the unprepared pilot.

How much should you train? No one really knows, but I’ll pass along my experience. Back when I was teaching in a factory-approved piston twin simulator, I noticed that pilots who had never trained in a realistic simulator frequently had difficulty flying critical engine-out-on-takeoff maneuvers to Private Pilot-AMEL standards, even by the end of the five-day training week.  At best we were able to get pilots back up to the minimum FAA standards for the worst-case scenarios in the time available. Pilots who came back about once a year or so tended to be marginally capable of flying to minimum standards at the beginning of refresher training, or at least were fairly easy to get back up to standards as the training progressed.  The pilots who came to simulator training every six to nine months tended to be pretty much on top of their game at the beginning of training, and were able to actually progress in their skills from one training session to the next (instead of having to work just to get back up to standards every time they came to train).

Twin throttle quadrant

Pulling the right levers at the right time takes continual training.

I noticed also that the total flying time in the 12 months previous to training, and the pilot’s total time overall, had very little to do with their ability in the simulator for engine-out work. The deciding factor was currency in simulator-based training. The proliferation of PC-based simulators mated to fairly realistic visual and even full-motion Flight Training Devices has made it far easier and less costly to get a good, simulator-based training experience in recent years.

I do instruct in twins. I do so, however, as an adjunct to my clients’ simulator training. And I only do it when I’ve had the opportunity to get into a sim myself for a little engine-out work. It’s important to train in the real airplane within the bounds of acceptable risk. But you simply cannot accurately or safely practice critical engine-out scenarios in the actual airplane; in my opinion it takes simulator training to be truly safe. Do so every year without fail, and you can enjoy the safety benefits of the second engine. Do not, and no matter how frequently you fly and even how frequently you train in the actual airplane, you’re fooling yourself if you think you’re safer because you have a second engine. In many respects the opposite is true.

One more thing—as you transition into the twin (i.e., while you have less than about 100 hours in make and model), it’s highly unlikely you’ll be able to get more than $1 million liability with a $100,000 per passenger sublimit for coverage. Many insurance companies require pilots to fly 100 to 150 hours each year to renew coverage. Some require simulator-based training as a condition of any coverage at all, especially in higher performance, pressurized and/or higher-value twins.

So, in my opinion:

  • If you continue to average 60 hours per year [as the pilot to whom I was writing had maintained], you’re “marginal” to “low” in terms of experience levels generally considered necessary for safety in twins.
  • You should plan to train in a type-specific simulator as part of your transition to a multiengine airplane, at six months after moving into the twin, and no less than annually thereafter. Note this is just part of the cost of safely flying a multiengine airplane.
  • You can (and should) supplement, but not totally replace, simulator-based training with in-aircraft training when flying a twin.

If all this is realistic to you, then yes, go get yourself a twin. If not, my advice would be to stick with a very capable, high-performance single.

I hope this has been (brutally) helpful. I never want to have to write about you!

My friend and student thanked me profusely for my advice. On the basis of his aircraft use patterns he chose not to purchase a twin, but instead upgraded to a much newer version of the same airplane he owned, complete with a turbocharger and modern avionics. I’ve trained him (and his wife) in that airplane, and they couldn’t be happier.

Read and subscribe to the free FLYING LESSONS Weekly e-newsletter at www.mastery-flight-training.com.

Thomas Turner
Latest posts by Thomas Turner (see all)
8 replies
  1. Josh Davis
    Josh Davis says:

    So, you fly out of 7000′ altitude airports and believe everyone else does too? Your recommendations are counter to all certified instructors, and counter to safety.

  2. Josh Davis
    Josh Davis says:

    Maybe clarify… Still on the runway, sure, idle, brakes, through the fence.

    But 3000′ DA, 200′ up, 200lbs under max gross, I’m already at Vyse, and may already be lifting the legs. No reason to ruin the bird when I have plenty of options.

  3. Len Forster
    Len Forster says:

    I agree 100%.

    Having flown “heavies” (C130s) in the military, as well as a few gen av twins, one thing I know for sure. Simulator or not simulator, if one isn’t willing to spend 3 to 5 hours a month working on emergency procedures in the actual twin engine airplane that he normally flies, he is suicidal without knowing it. Simulator school for the C130 is intensive and takes a few weeks, and that airplane has 4 engines, making it less of a problem to lose an engine than it would in a twin. Still, the simulator training was of critical importance.

    As you point out, a bad decision in a twin when an engine fails can give you a completely uncontrollable, unrecoverable, flying rock. On the other hand, with an engine loss in a single, you at least have a glider.

    I lived and flew for many years in south Florida, and, every time there was an airplane crash in the 70s and 80s, it was invariable a real estate broker, a lawyer or a doctor, someone with more money that sense, who could afford to upgrade to a twin but who wasn’t willing to upgrade his training.

    As far as I am concerned, most pilots should stay with singles, unless they plan on being professionals, and, even then, only if they’re willing to spend the time in the simulator and in the aircraft practicing emergency procedures.

    • F. Knipping
      F. Knipping says:

      I owned a Baron B55 back in 2015. August 2015, departed Republic airport for a tour of New Yor City with three heavy friends tagging along. After flying over the Hudson at 1500 feet and over the George Washington Bridge, I pushed the throttles to climb to 4500. After climbing to 3800, I noticed the Baron wasn’t climbing and EGT on right engine was zero. I pulled back on the right engine throttle and notice nothing happened. I tried to restart the right engine by checking magnetos, auxiliary fuel pump to no avail. Finally, I feathered the prop on the right engine, called ATC and advised of my problem with the right engine and requested radar vectors back to Republic airport. As I approached Republic airport, the tower advised me to lower my gear. It seems I had forgotten to lower the landing gear. Before landing, I made sure my speed was at least 100 knots. Landing was uneventful and the Baron behaved as though it had two engines once I had feathered the prop. My advise, nothing like a twin. Now I own a Cessna, Crusader 303 and enjoy every trip.

  4. Richard McGinnis
    Richard McGinnis says:

    One performance aspect of the light twin was not mention is the increased performance when the light twin is flown at less than gross weight. In particular, the time between “chop (accelerate) and stop” to “feather and fly” decreases significantly at ligter weights, particularly at normal density altitudes in the flat lands. My normally asperated BE 58 has almost no gap beteen the two segments that would result in an off airport landing when departing from a 3000 foot runway. With a 4000 foot runway, the gap does not exist, eliminating the risk of an off airport landing. Since most aircraft are not flown at gross wweight very often, I suggest this is a true safety advantage for the light twin given reasonable pilot proficiency.

Trackbacks & Pingbacks

Comments are closed.